Rock Patch™ makes it easier to fill holes, cracks and pitted surfaces

By Daich Coatings.

Rock Patch™ is available in one and three gallon containers and is the ideal starting solution for cracked, broken surfaces before beginning covering projects with other Daich Coatings products.

Starting a new project often means beginning with a clean, smooth surface. Getting that perfect surface level is now easier than ever with Rock Patch™ filler, leveler and resurfacer from Daich Coatings.

Made with a tough polymer/stone formula, the pre-mixed compound comes out of the container ready to use. The cement-free product requires no messy mixing and can be used as a prep work step on both interior and exterior surfaces. Simply pop the lid, stir and apply.

Easy-fix solution

“Whether you need to fill cracks and holes on concrete walkways or smooth out the surface of a garage floor before recoating, Rock Patch is the solution,” says Peter Daich, president of Daich Coatings. “This odorless product has flexibility to it and can be worked with slowly. It doesn’t dry quickly like concrete. Take your time to smooth it into the location you wish to repair. Then let it dry to create a rock hard surface.”

Rock Patch completely resurfaces the area needed, forming a firm bond to the underlayment. The dry Rock Patch finish is impact, salt and moisture resistant.

Suitable for both home projects and large-scale industrial projects, Rock Patch is available in one and three gallon containers and is the ideal starting solution for cracked, broken surfaces before beginning covering projects with other Daich Coatings products. In addition to spot fixes, Rock Patch can be used as a full surface base for floor paints, decorative coatings, linoleum and more. It can also be used as a flooring and be left “as is” once sealed with TracSafe® Anti-Slip Sealer or Garage and Driveway Concrete Sealer from Daich Coatings to protect the surface from year-round weather and stains.

Preparation, the key to success

“Because Rock Patch stands up to hot tires and foot traffic, it can be used as an entire floor covering,” says Peter. “As with any project, the key to success is preparation. For spot repairs, the crack, hole or pitted area should be clean, dry and free from debris before applying the product. If you’re resurfacing an area with Rock Patch, then the surface should be pressure washed to remove debris. An alternative is to scrub with our Concrete Safe Cleaner and Etcher. After rinsing, the area should be allowed to thoroughly dry before moving ahead with the application.”

Normal cure time is 24 hours for Rock Patch. Dry times should be increased when the product is applied thick or in damp, cool conditions.

Videos about Rock Patch™ and other Daich products:

• Terrazzo
• SpreadStone application tips
• RollerRock
• TracSafe Color Coat Kit